Wearable Battery Checker Tool

1What battery problem are you experiencing?
▼

What best describes your battery issue?

Battery drains much faster than it used to Watch won’t charge at all Charges very slowly Battery dies before the rated battery life Battery percentage is inaccurate or jumps around
2Check the charger and charging contacts
▼

Are you using the original charger or a certified replacement?

Yes — original or certified charger No — third party or cheap charger Not sure

Non-certified chargers can cause slow charging, inaccurate percentage readings, and long-term battery damage.

Are the charging contacts on the watch and charger clean?

Yes — clean and clear No — there is visible dirt or residue Haven’t checked

Clean contacts gently with a dry cloth or soft toothbrush — never use water or cleaning products.
3Check battery-draining settings
▼

Certain features significantly drain battery life. Check if any of these are on.

Which of these features are currently active on your watch?

Always-on display, GPS, and heart rate monitoring all active Some of these are on Most features are off or set to minimal

Always-on display alone can reduce battery life by 30-50%. Turn it off if battery life is critical.
4How old is the device?
▼

How long have you owned this wearable?

Less than 1 year 1-2 years More than 2 years

Wearable batteries typically degrade noticeably after 18-24 months of regular use.

Is the firmware up to date?

Yes No or not sure

Firmware updates often include battery optimisation improvements.
5Calibrate battery and consider replacement
▼

Have you tried a full battery calibration?

Yes and it improved accuracy Yes but no improvement Not yet

Calibration: fully drain the battery until the watch turns off → charge to 100% without interruption → restart.

Does the companion app show a battery health percentage?

Yes — shows above 80% Yes — shows below 80% App does not show battery health